5-35
Field
Description
Current(A)
Output current of the power supply. This field displays two hyphens (
--
) if
it is not supported in the current software version.
Voltage(V)
Output voltage of the power supply. This field displays two hyphens (
--
) if
it is not supported in the current software version.
Power(W)
Output power of the power supply. This field displays two hyphens (
--
) if
it is not supported in the current software version.
Displaying the temperature information for the
firewall
Use the
display environment
command to display the temperature information of the firewall.
<Sysname> display environment
System Temperature information (degree centigrade):
-------------------------------------------------------------------------------------
--
Slot Sensor Temperature LowerLimit Warning-UpperLimit Alarm-UpperLimit
Shutdown-UpperLimit
1 inflow 1 37 0 60 65
NA
1 outflow 1 42 0 71 83
NA
1 hotspot 1 71 0 82 92
97
Table5-5 Output description
Field
Description
Sensor
Temperature sensor:
•
inflow
—Air inlet vent temperature sensor.
•
outflow
—Air outlet vent temperature sensor.
•
hotspot
—Hotspot temperature sensor.
Temperature
Current temperature.
LowerLimit
Low temperature alarm threshold.
Warning-UpperLimit
Warning-level high temperature alarm threshold.
Alarm-UpperLimit
Alarm-level high temperature alarm threshold.
Shutdown-UpperLimit
Shutdown-level high temperature alarm threshold. The firewall automatically
powers off when the temperature exceeds this threshold.
Displaying the operational statistics about the
firewall
When you perform routine maintenance or the system fails, you might need to view the operational
information of each functional module for locating failures. Typically you need to run
display
commands one by one. To collect more information one time, you can execute the
display