3-27
4.
Enter the default username
admin
and password
admin
and then click
Login
.
Logging in from the serial console port or micro USB console
port
To log in from the serial console port or micro USB console port, see "
environment and configuring terminal parameters
Logging in through Telnet
1.
Connect your PC to the serial console port or micro USB console port on the firewall, and
enable the Telnet function in system view by using the
telnet server enable
command.
2.
Enter VTY user line view, and configure the authentication mode, user role, and common
properties in VTY user line view.
By default, the authentication mode is
scheme
, and the username and password are
admin
.
3.
Specify an IP address for the network port of the PC and make sure the PC and the firewall are
reachable to each other.
The IP address of management Ethernet port 0/MGMT is 192.168.0.1/24. The IP address of
management Ethernet port 1/MGMT is 192.168.1.1/24.
4.
Run the Telnet client on the PC and enter the default login information.
