3-26
........................................Done.
System image is starting...
Cryptographic algorithms tests passed.
Startup configuration file doesn't exist or is invalid.
Line con0 is available.
Press ENTER to get started.
…
Press
Enter
to access user view of the firewall.
NOTE:
To access the EXTENDED-BOOTWARE menu, press
Ctrl
+
B
within four seconds at the
prompt "Press Ctrl+B to access EXTENDED-BOOTWARE MENU." If you do not press
Ctrl
+
B
at the prompt, the system starts to read and decompress program files. To enter the
EXTENDED-BOOT menu afterwards, you need to reboot the firewall.
Logging in to the firewall
You can use the following methods to access and manage the firewall. For more information about
logging in to the firewall, see the configuration guides and command references for the firewall.
•
Logging in from the Web interface
•
Logging in from the serial console port or micro USB console port
•
Logging in from the Web interface
IMPORTANT:
After accessing the Web interface with the default account, modify the password of the default
account or create a new administrator account and delete the default account as a best practice.
At the first login from the Web interface, you can use the default account or use an account created
from the CLI.
The default Web interface login information is as follows:
•
Username
—admin
•
Password
—admin
•
IP address of the management Ethernet port M-GigabitEthernet 1/0/0
(0/MGMT)
—192.168.0.1/24
•
IP address of the management Ethernet port M-GigabitEthernet 1/0/1
(1/MGMT)
—192.168.1.1/24
This section logs in to the firewall from the 0/MGMT interface as an example.
To log in to the firewall from Web interface 0/MGMT by using the default account:
1.
Use an Ethernet cable to connect a PC to the management Ethernet port on the firewall.
2.
Configure an IP address in subnet 192.168.0.0/24 for the PC. Make sure the PC and the firewall
are reachable to each other.
The PC must use a different IP address than the management Ethernet port.
3.
Start a browser, enter
192.168.0.1
in the address bar, and press
Enter
.
