36
Figure 31
Installing an NEPS3500-A power frame
IMPORTANT:
For a switch that requires power supply redundancy, install the same number of sub power supplies in the
two power frames.
Installing a sub power supply
1.
Pull the handle of a sub power supply downward to the unlock position.
2.
Gently push the sub power supply into the AC power frame (NEPS3500-A) until the rear side of the
sub power supply makes close contact with the power frame backplane.
3.
Push the handle upward so that the handle locks the sub power supply in place.
Figure 32
Installing a sub power supply
Installing a card
You can install MPUs and LPUs in a similar way. This section describes how to install an MPU.
