H3C S6850 Series, Configuration Manual

Page: 226 / 394

1
Configuring QinQ
This document uses the following terms:
•
CVLAN —Customer network VLANs, also called inner VLANs, refer to VLANs that a customer
uses on the private network.
•
SVLAN —Service provider network VLANs, also called outer VLANs, refer to VLANs that a
service provider uses to transmit VLAN tagged traffic for customers.
About QinQ
802.1Q-in-802.1Q (QinQ) adds an 802.1Q tag to 802.1Q tagged customer traffic. It enables a
service provider to extend Layer 2 connections across an Ethernet network between customer sites.
QinQ benefits
QinQ provides the following benefits:
•
Enables a service provider to use a single SVLAN to convey multiple CVLANs for a customer.
•
Enables customers to plan CVLANs without conflicting with SVLANs.
•
Enables customers to keep their VLAN assignment schemes unchanged when the service
provider changes its VLAN assignment scheme.
•
Allows different customers to use overlapping CVLAN IDs. Devices in the service provider
network make forwarding decisions based on SVLAN IDs instead of CVLAN IDs.
How QinQ works
As shown in Figure 1 , a QinQ frame transmitted over the service provider network carries the
following tags:
•
CVLAN tag —Identifies the VLAN to which the frame belongs when it is transmitted in the
customer network.
•
SVLAN tag —Identifies the VLAN to which the QinQ frame belongs when it is transmitted in the
service provider network. The service provider allocates the SVLAN tag to the customer.
The devices in the service provider network forward a tagged frame according to its SVLAN tag only.
The CVLAN tag is transmitted as part of the frame's payload.
Figure 1 Single-tagged Ethernet frame header and double-tagged Ethernet frame header