13
port hybrid
vlan
vlan-id-list
{
tagged
|
untagged
}
By default, a hybrid port is an untagged member of the VLAN to which the port belongs when its
link type is
access
.
8.
Associate the hybrid port with the specified IP subnet-based VLAN.
port hybrid ip-subnet-vlan
vlan
vlan-id
By default, a hybrid port is not associated with a subnet-based VLAN.
Configuring protocol-based VLANs
About protocol-based VLANs
A protocol-based VLAN has one or multiple protocol templates. A protocol template defines a
protocol type and an encapsulation format as the match criteria to match inbound packets. Each
protocol template has a unique index in the protocol-based VLAN. All protocol templates in a
protocol-based VLAN have the same VLAN ID.
For a port to assign inbound packets to protocol-based VLANs, perform the following tasks:
•
Assign the port to the protocol-based VLANs.
•
Associate the port with the protocol templates of the protocol-based VLANs.
When an untagged packet arrives at the port, the port processes the packet as follows:
•
If the protocol type and encapsulation format in the packet match a protocol template, the port
tags the packet with the VLAN tag specific to the protocol template.
•
If no protocol templates are matched, the port tags the packet with its PVID.
Restrictions and guidelines
The voice VLAN in automatic mode processes only tagged voice traffic. Do not configure a VLAN as
both a protocol-based VLAN and a voice VLAN.
Procedure
1.
Enter system view.
system-view
2.
Enter VLAN view.
vlan
vlan-id
3.
Associate the VLAN with a protocol template.
protocol-vlan
[
protocol-index
]
{
at
|
ipv4
|
ipv6
|
ipx
{
ethernetii
|
llc
|
raw
|
snap
}
|
mode
{
ethernetii
etype etype-id
|
llc
{
dsap dsap-id
[
ssap ssap-id
]
|
ssap ssap-id
}
|
snap
etype etype-id
}
}
By default, a VLAN is not associated with a protocol template.
4.
Exit VLAN view.
quit
5.
Enter interface view.
{
Enter Layer 2 Ethernet interface view.
interface interface-type interface-number
{
Enter Layer 2 aggregate interface view.
interface bridge-aggregation
interface-number
6.
Set the port link type to hybrid.
port link-type hybrid
By default, all ports are access ports.
Summary of Contents for S6850 Series
Page 108: ...48 WGE1 0 3 32768 49153 50100 0x7b 0001 0001 0001 ACDEF...
Page 259: ...21 6 N A 200 6...
Page 337: ...ii...
