15
3.
(Optional.)
Restoring the default settings for the VLAN interface
Prerequisites
Before you create a VLAN interface for a VLAN, create the VLAN first.
Creating a VLAN interface
1.
Enter system view.
system-view
2.
Create a VLAN interface and enter its view.
interface vlan-interface interface-number
3.
Assign an IP address to the VLAN interface.
ip
address
ip-address
{
mask
|
mask-length
}
[
sub
]
By default, no IP address is assigned to a VLAN interface.
4.
(Optional.) Configure the description for the VLAN interface.
description text
The default setting is the VLAN interface name. For example,
Vlan-interface1 Interface
.
5.
(Optional.) Set the MTU for the VLAN interface.
mtu size
By default, the MTU of a VLAN interface is 1500 bytes.
6.
(Optional.) Set a MAC address for the VLAN interface.
mac-address mac-address
By default, no MAC addresses are set for a VLAN interface.
7.
(Optional.) Set the expected bandwidth for the interface.
bandwidth
bandwidth-value
By default, the expected bandwidth (in kbps) is the interface baud rate divided by 1000.
8.
Bring up the VLAN interface.
undo shutdown
By default, a VLAN interface is not manually shut down. The status of the VLAN interface
depends on the status of member ports of the VLAN.
Specifying a traffic processing slot for the VLAN interface
About traffic processing slot
Specify a traffic processing slot for a VLAN interface if all traffic on the VLAN interface must be
processed on the same slot.
Procedure
1.
Enter system view.
system-view
2.
Enter a VLAN interface view.
interface vlan-interface interface-number
3.
Specify a traffic processing slot for the VLAN interface.
service slot
slot-number
By default, no traffic processing slot is specified for the VLAN interface.
Summary of Contents for S6850 Series
Page 108: ...48 WGE1 0 3 32768 49153 50100 0x7b 0001 0001 0001 ACDEF...
Page 259: ...21 6 N A 200 6...
Page 337: ...ii...
