11
country-code
{
ca-type ca-value
}&<1-10>
|
elin-address
tel-number
}
}
}
By default, the nearest bridge agent advertises all supported TLVs except the following
TLVs:
−
DCBX
TLVs.
−
Location
identification
TLVs.
−
Port and protocol VLAN ID TLVs.
−
VLAN
name
TLVs.
−
Management VLAN ID TLVs.
lldp agent nearest-nontpmr tlv-enable
{
basic-tlv
{
all
|
port-description
|
system-capability
|
system-description
|
system-name
|
management-address-tlv
[
ipv6
]
[
ip-address
]
}
|
dot1-tlv
{
all
|
port-vlan-id
|
link-aggregation
} |
dot3-tlv
{
all
|
link-aggregation
}
}
lldp tlv-enable
dot1-tlv
{
protocol-vlan-id
[
vlan-id
]
|
vlan-name
[
vlan-id
]
|
management-vid
[
mvlan-id
]
}
By default, the nearest non-TPMR bridge agent does not advertise any TLVs.
lldp agent nearest-customer
tlv-enable
{
basic-tlv
{
all
|
port-description
|
system-capability
|
system-description
|
system-name
|
management-address-tlv
[
ipv6
]
[
ip-address
]
}
|
dot1-tlv
{
all
|
port-vlan-id
|
link-aggregation
}
|
dot3-tlv
{
all
|
link-aggregation
} }
lldp tlv-enable
dot1-tlv
{
protocol-vlan-id
[
vlan-id
]
|
vlan-name
[
vlan-id
]
|
management-vid
[
mvlan-id
]
}
By default, the nearest customer bridge agent advertises all the supported basic
management TLVs and IEEE 802.1 organizationally specific TLVs.
{
In Layer 3 Ethernet interface view:
lldp
tlv-enable
{
basic-tlv
{
all
|
port-description
|
system-capability
|
system-description
|
system-name
|
management-address-tlv
[
ipv6
]
[
ip-address
|
interface
loopback
interface-number
]
}
|
dot1-tlv
{
all
|
link-aggregation
}
|
dot3-tlv
{
all
|
link-aggregation
|
mac-physic
|
max-frame-size
|
power
}
|
med-tlv
{
all
|
capability
|
inventory
|
power-over-ethernet
|
location-id
{
civic-address device-type country-code
{
ca-type
ca-value
}&<1-10>
|
elin-address tel-number
}
}
}
By default, the nearest bridge agent advertises the following TLVs:
−
Link aggregation TLVs in the 802.1 organizationally specific TLV set.
−
All supported 802.3 organizationally specific TLVs.
−
All supported LLDP-MED TLVs except the network policy TLVs.
lldp agent
{
nearest-nontpmr
|
nearest-customer
}
tlv-enable
{
basic-tlv
{
all
|
port-description
|
system-capability
|
system-description
|
system-name
|
management-address-tlv
[
ipv6
]
[
ip-address
]
}
|
dot1-tlv
{
all
|
link-aggregation
}
|
dot3-tlv
{
all
|
link-aggregation
} }
By default:
−
The nearest non-TPMR bridge agent does not advertise any TLVs.
−
The nearest customer bridge agent advertises all supported basic management TLVs
and link aggregation TLVs in the IEEE 802.1 organizationally specific TLV set.
{
In management Ethernet interface view:
Summary of Contents for S6850 Series
Page 108: ...48 WGE1 0 3 32768 49153 50100 0x7b 0001 0001 0001 ACDEF...
Page 259: ...21 6 N A 200 6...
Page 337: ...ii...
