3-4
(3) Slotted hole 2: Used to fix the guide rail to the front bracket
Guide rails purchased from H3C apply only to standard cabinets 1,000 mm (39.37 in.) deep. Use other
supports to substitute for guide rails in the case of other cabinet depths.
Use Front Mounting Brackets to Install a Switch
Only the S5500-28C-SI and S5500-52C-SI support installation using front mounting brackets.
Follow these steps to mount a switch into a 19-inch standard cabinet:
Step1
Wear an ESD-preventive wrist strap and ensure a good skin contact and grounding.
Step2
Check the grounding and stability of the cabinet.
Step3
Take out the screws which are packed together with the front mounting brackets, and fix one end of
mounting brackets to the switch, as shown in
Figure 3-5
.
Figure 3-5
Fix front mounting brackets (1)
(1) Front panel of the switch
Step4
Place the switch horizontally in a proper position, and fix the other end of mounting brackets to the front
brackets with screws and captive nuts, as shown in
Figure 3-6
.
