5-10
Enter your choice(0-3):
Step4
Select
1
in the Boot ROM update menu to download the Boot ROM software using TFTP. Then set the
following TFTP-related parameters as required:
Load File name :update.btm
Switch IP address :1.1.1.2
Server IP address :1.1.1.1
The parameters are described in
Table 5-2
.
Table 5-2
Description of the TFTP parameters
Item
Description
Load File name :
Name of the file to be downloaded (for example,
update.btm
)
Switch IP address :
IP address of the switch (for example, 1.1.1.2)
Server IP address :
IP address of server (for example, 1.1.1.1)
Step5
Press
Enter
after inputting the information above. The system displays the following information:
Are you sure you want to download file to flash? Yes or No(Y/N)
Step6
Enter
Y
to start file downloading or
N
to return to the Boot ROM update menu. If you enter
Y
, the system
begins to download and update the Boot ROM software. Upon completion, the system displays the
following information to show the loading process is completed:
Loading........................................done
Bootrom updating..........done!
BOOT MENU
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Step7
Enter
0
to restart the device. After that, the updated Boot ROM file becomes effective.
Loading host software
Select
1
in Boot Menu to load the host software of the switch. The system displays the following
information:
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
