3-6
Figure 3-7
Fix front mounting brackets and load-bearing screws
(1) Load-bearing screw
(2) Optional positions for Load-bearing screw
(3) Front panel
(4) Front mounting bracket
(5) Screw used to fix front mounting brackets to the switch
There are three positions (S5500-20TP-SI has two positions) to mount a load-bearing screw on both
sides of a switch. You should select a proper position according to the actual requirements. The rear
mounting brackets tightly contacted with the load-bearing screws can support the switch.
Step5
Select a position to install the switch and fix the rear mounting brackets to the rear posts with screws
and captive nuts, as shown in
Figure 3-8
.
Figure 3-8
Fix rear mounting brackets
(1) Rear square-holed post
(2) Rear mounting bracket
Step6
Hold the bottom of the switch with one hand and the front part of the switch with the other hand, and
push the switch into the cabinet gently, as shown in
Figure 3-9
.
