68
Storage-type: nonVolatile
Table 17
Output description
Field Description
Community name
Displays the community name created by using the
snmp-agent
community
command or the user name created by using the
snmp-agent usm-user
{
v1
|
v2c
} command.
Group name
SNMP group name.
•
If the community is created by using the
snmp-agent community
command, the group name is the same as the community name.
•
If the community is created by using the
snmp-agent usm-user
{
v1
|
v2c
} command, the name of the group to which the user belongs
is displayed.
Acl
Number of the ACL that controls the access of the NMSs in the
community to the device.
Only the NMSs with the IP addresses permitted in the ACL can access
the device with the community name.
Storage-type
Storage type:
•
volatile—Settings are lost when the system reboots.
•
nonVolatile—Settings remain after the system reboots.
•
permanent—Settings remain after the system reboots and can be
modified but not deleted.
•
readOnly
—
Settings remain after the system reboots and cannot be
modified or deleted.
•
other—Any other storage type.
display snmp-agent group
Syntax
display snmp-agent group
[
group-name
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default level
1: Monitor level
Parameters
group-name
: Specifies an SNMP group name, a case-sensitive string of 1 to 32 characters. You can
specify an SNMPv1, SNMPv2c, or SNMPv3 group.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.