233
Statistics for packets recieved successfully:
Peak 10Sec 1Min 5Min Total-Data
------------------------------------------------------------
1 1 1 0 82
Statistics for packets acknowledged:
Peak 10Sec 1Min 5Min Total-Data
------------------------------------------------------------
1 1 1 0 78
Table 51
Output description
Field Description
Peak
Peak rate (average rate is counted every 10 seconds, the
greatest value of which is taken as the peak rate), in pps.
10Sec
Average rate in the past 10 seconds, in pps.
1Min
Average rate in the past 1 minute, in pps.
5Min
Average rate in the past 5 minutes, in pps.
Total-Data
Total amount of data collected from the time when IPC
performance statistics was enabled to the time when this
command is executed.
display ipc queue
Syntax
display ipc queue
{
node
node-id
|
self-node
} [
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default level
1: Monitor level
Parameters
node
node-id
: Displays the sending queue information of the specified node, where
node-id
represents
the number of the specified node. The value is in the range of 0 to 20.
self-node
: Displays the sending queue information of the local node.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the
display ipc queue
command to display the sending queue information of the specified node.