176
statistics hold-time
Syntax
statistics hold-time
hold-time
undo statistics hold-time
View
DLSw, DNS, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter, voice test type view
Default level
2: System level
Parameters
hold-time
: Specifies the hold time of a statistics group in minutes, in the range of 1 to 1440.
Description
Use the
statistics hold-time
command to configure the hold time of statistics groups for a test group. A
statistics group is deleted when its hold time expires.
Use the
undo statistics hold-time
command to restore the default.
By default, the hold time of a statistics group is 120 minutes.
This command is not supported by DHCP tests.
Examples
# Configure the hold time of a statistics group as 3 minutes.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] statistics hold-time 3
statistics max-group
Syntax
statistics max-group
number
undo statistics max-group
View
DLSw, DNS, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter, voice test type view
Default level
2: System level
Parameters
number
: Specifies the maximum number of statistics groups that can be kept, in the range of 0 to 100.
To disable collecting statistics, specify number 0.
Description
Use the
statistics max-group
command to configure the maximum number of statistics groups that can be
kept.
Use the
undo statistics max-group
command to restore the default.