170
View
DHCP, DNS, DLSw, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo test type view
Default level
2: System level
Parameters
item-number
: Specifies a reaction entry ID, in the range of 1 to 10.
threshold-type
: Specifies a threshold type.
consecutive
consecutive-occurrences
: Specifies the number of consecutive probe failures since the test
group starts. The value is in the range of 1 to 16.
action-type
: Specifies what actions to be triggered to react to certain measurement conditions.
trigger-only
: Triggers other modules to react to certain conditions.
Description
Use the
reaction checked-element probe-fail
command to configure a reaction entry for monitoring the
probe results of the current test group. If the number of consecutive probe failures reaches the threshold,
collaboration with other modules is triggered. You cannot edit a reaction entry. To change the attributes
in a reaction entry, use the
undo reaction
command to delete this entire entry and start over.
Use the
undo reaction
command to remove the specified reaction entry.
By default, no reaction entries are configured.
The collaboration function is not supported by UDP jitter or voice tests.
Related commands:
track
(High Availability Command Reference).
Examples
# Create reaction entry 1. If probe failure occurs consecutively for 3 times, collaboration with other
modules is triggered.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type tcp
[Sysname-nqa-admin-test-tcp] reaction 1 checked-element probe-fail threshold-type
consecutive 3 action-type trigger-only
reaction checked-element rtt
Syntax
reaction
item-number
checked-element rtt threshold-type
{
accumulate
accumulate-occurrences
|
average
}
threshold-value
upper-threshold lower-threshold
[
action-type
{
none
|
trap-only
} ]
undo reaction
item-number
View
UDP jitter, voice test type view
Default level
2: System level