201
undo ip netstream aggregation advanced
View
System view
Default level
3: Manage level
Parameters
None
Description
Use the
ip netstream aggregation advanced
command to enable NetStream hardware aggregation.
Use the
undo ip netstream aggregation advanced
command to disable NetStream hardware
aggregation.
By default, NetStream hardware aggregation is disabled.
The configuration in NetStream aggregation view applies to NetStream hardware aggregation, if
enabled.
The NetStream hardware aggregation data export and NetStream traditional data export are mutually
exclusive. The hardware aggregation does not take effect if the destination address for NetStream
traditional data export (
ip netstream export host
in system view) is configured.
The NetStream hardware aggregation entries are stored in the cache where NetStream traditional data
entries are recorded, and then exported.
Related commands:
ip netstream export host
and
ip netstream aggregation
Examples
# Enable NetStream hardware aggregation.
<Sysname> system-view
[Sysname] ip netstream aggregation advanced
ip netstream export host
Syntax
ip netstream export host
ip-address udp-port
[
vpn-instance
vpn-instance-name
]
undo ip netstream export host
[
ip-address
[
vpn-instance
vpn-instance-name
] ]
View
System view, NetStream aggregation view
Default level
3: Manage level
Parameters
ip-address
: Specifies a destination IP address for NetStream data export
.
udp-port
: Specifies a destination UDP port number for NetStream data export, in the range of 0 to
65535.