Operation Manual – IPv4 Routing
H3C S5500-EI Series Ethernet Switches
Chapter 2 RIP Configuration
2-19
z
Use the
display rip
command to check whether some interface is disabled
2.7.2 Route Oscillation Occurred
Symptom:
When all links work well, route oscillation occurs on the RIP network. After displaying
the routing table, you may find some routes appear and disappear in the routing table
intermittently.
Analysis:
In the RIP network, make sure all the same timers within the whole network are
identical and relationships between timers are reasonable. For example, the timeout
timer value should be larger than the update timer value.
Solution:
z
Use the
display rip
command to check the configuration of RIP timers
z
Use the
timers
command to adjust timers properly.
