Operation Manual – VLAN
H3C S5500-EI Series Ethernet Switches
Chapter 3 GVRP Configuration
3-6
To do…
Use the command…
Remarks
Configure the GVRP
registration mode on
the port
gvrp registration
{
fixed
|
forbidden
|
normal
}
Optional
The default is
normal
.
Note:
Because GVRP is not compatible with the BPDU tunneling feature, you must disable
BPDU tunneling before enabling GVRP on a BPDU tunneling–enabled Ethernet port.
3.3.2 Configuring GARP Timers
Follow these steps to configure GARP timers:
To do…
Use the command…
Remarks
Enter system view
system-view
––
Configure the GARP
LeaveAll timer
garp timer leaveall
timer-value
Optional
The default is 1000
centiseconds.
Enter
Ethernet
port view
interface interface-type
interface-number
Enter
Ethernet
port view
or
port-group
view
Enter
port-group
view
port-group
{
manual
port-group-name |
aggregation
agg-id
}
Use either command.
In Ethernet port view, the
subsequent
configurations only apply
to the current port; in
port group view, the
subsequent
configurations apply to
all ports in the port
group.
Configure the hold
timer, join timer, and
leave timer
garp timer
{
hold
|
join
|
leave
}
timer-value
Optional
The default is 10
centiseconds for the
hold timer, 20
centiseconds for the join
timer, and 60
centiseconds for the
leave timer.
As for the GARP timers, note that:
z
The setting of each timer must be a multiple of five (in centiseconds).
z
The settings of the timers are correlated. If you fail to set a timer to a certain value,
you can try to adjust the settings of the rest timers.
Table 3-2
shows the
relationship of the timers.
