Operation Manual – Port Security
H3C S5500-EI Series Ethernet Switches
Chapter 1 Port Security Configuration
1-16
[Switch] port-security oui 1234-0100-1111 index 1
[Switch] port-security oui 1234-0200-1111 index 2
[Switch] port-security oui 1234-0300-1111 index 3
[Switch] port-security oui 1234-0400-1111 index 4
[Switch] port-security oui 1234-0500-1111 index 5
[Switch] interface gigabitethernet 1/0/1
# Set the port security mode to userLoginWithOUI.
[Switch-GigabitEthernet1/0/1] port-security port-mode userlogin-withoui
3)
Verify the configuration
After completing the above configurations, you can use the following command to view
the configuration information of the RADIUS scheme named radsun:
<Switch> display radius scheme radsun
SchemeName = radsun
Index = 0 Type = standard
Primary Auth IP = 192.168.1.1 Port = 1812 State = active
Primary Acct IP = 192.168.1.2 Port = 1813 State = active
Second Auth IP = 192.168.1.2 Port = 1812 State = active
Second Acct IP = 192.168.1.1 Port = 1813 State = active
Auth Server Encryption Key = name
Acct Server Encryption Key = money
Accounting-On packet disable, send times = 5 , interval = 3s
Interval for timeout(second) = 5
Retransmission times for timeout = 5
Interval for realtime accounting(minute) = 15
Retransmission times of realtime-accounting packet = 5
Retransmission times of stop-accounting packet = 500
Quiet-interval(min) = 5
Username format = without-domain
Data flow unit = Byte
Packet unit = one
Use the following command to view the configuration information of the ISP domain
named sun:
<Switch> display domain sun
Domain = sun
State = Active
Access-limit = 30
Accounting method = Required
Default authentication scheme : radius=radsun
Default authorization scheme : local
Default accounting scheme : local
Domain User Template:
