Operation Manual – Login
H3C S5500-EI Series Ethernet Switches
Chapter 8 Controlling Login Users
8-7
[H3C-acl-basic-2000] rule 1 permit source 10.110.100.52 0
[H3C-acl-basic-2000] rule 2 permit source 10.110.100.46 0
[H3C-acl-basic-2000] rule 3 deny source any
[H3C-acl-basic-2000] quit
# Apply the ACL to only permit SNMP users sourced from the IP addresses of
10.110.100.52 and 10.110.100.46 to access the switch.
[H3C] snmp-agent community read h3c acl 2000
[H3C] snmp-agent group v2c h3cgroup acl 2000
[H3C] snmp-agent usm-user v2c h3cuser h3cgroup acl 2000
8.4 Controlling Web Users by Source IP Address
You can manage a S5500-EI series Ethernet switch remotely through Web. Web users
can access a switch through HTTP connections.
You need to perform the following two operations to control Web users by source IP
addresses.
z
Defining an ACL
z
Applying the ACL to control Web users
8.4.1 Prerequisites
The controlling policy against Web users is determined, including the source IP
addresses to be controlled and the controlling actions (permitting or denying).
8.4.2 Controlling Web Users by Source IP Addresses
Controlling Web users by source IP addresses is achieved by applying basic ACLs,
which are numbered from 2000 to 2999.
To do…
Use the command…
Remarks
Enter system view
system-view
—
Create a basic ACL
or enter basic ACL
view
acl number
acl-number
[
match-order
{
config
|
auto
} ]
As for the
acl number
command, the
config
keyword is specified by
default.
Define rules for the
ACL
rule
[
rule-id
] {
permit
|
deny
}
[
source
{
sour-addr
sour-wildcard
|
any
} |
time-range
time-name
|
fragment
|
logging
]*
Required
Quit to system view
quit
—
Apply the ACL to
control Web users
ip http acl
acl-number
Optional
