9-4
Repacking the chassis
Removing the chassis from the rack
The device is heavy. Use a mechanical lift to move the device.
To remove the chassis from the rack:
1.
Prepare the wooden pallet base, carton, and packing bag of the chassis. Make sure they are
clean, dry, and not damaged.
2.
Put the wooden pallet base to a proper place.
3.
As shown in callout 1 in
, use a Phillips screwdriver to loosen the screws that attach
the mounting brackets to the rack.
4.
As shown in callout 2 in
, cooperate with a minimum of four people to slide the
chassis outwards along the slide rails. When most part of the chassis is removed from the slide
rails, lift up the chassis by holding the handles at the chassis sides to completely remove the
chassis from the rack.
5.
Put the chassis onto the wooden pallet base.
Figure 9-2 Removing the device from the rack (S12516R)
(1) Loosen the captive screws that attach the mounting brackets to the rack
(2) Chassis handles
(3) Slide the chassis out of the rack along the slide rails
Repacking the chassis
1.
Align the left and right edges of the chassis bottom with the left and right positioning lines
respectively on the wooden pallet base. See
for the wooden pallet base.
2
1
3
3
1
