3-12
Figure 3-9 Removing a filler panel from a fabric module slot (S12516R)
(1) Loosen the captive screws on the ejector levers
(2) Rotate the ejector levers outward
(3) Pull the filler panel out of the slot along the guide rails
Installing fan trays
WARNING!
When removing the fan tray, keep your hands and fingers away from the spinning fan blades. Let the
fan blades completely stop before you remove the fan tray.
CAUTION:
•
To avoid fan tray damage, use both hands when installing or removing a fan tray.
•
To prevent dust from entering the chassis, make sure each fan tray slot has a filler panel or fan
tray installed when the device is not in use.
CAUTION:
When you hot swap fan trays, follow these guidelines:
•
Ensure electricity safety.
•
When you hot swap a fan tray, the fan speed of the remaining fan trays automatically increases.
Take noise protection measures such as wearing an earmuff or earplug. In addition, make
preparations before hot swapping a fan tray to minimize the operation time.
1
1
2
3
2
