3-5
Figure 3-3 Installing an MPU (S12504R)
(1) Loosen the captive screws and remove the filler panel
(2) Pivot up the handle
(3) Push the MPU into the slot along the guide rails
(4) Push the MPU until the handle breaks touch the slot edges tightly
(5) Push the handle until the MPU is secure in position
(6) Fasten the screws on the MPU
Installing service modules
CAUTION:
•
Keep filler panels installed on unused service module slots.
•
To prevent a filler panel from being drawn into the chassis when fan speed is high, use both
hands to grasp the filler panel by its two sides during filler panel installation and removal on an
operating device.
•
To prevent card damage and ensure correct operation, service modules can only be used with
fabric modules of the same type. Type H service modules have a character of
H
in their card
identifier (for example, LSXM1CGQ36
H
BR1). Type H fabric modules have a character string of
SFH
in their card identifier (for example, LSXM1
SFH
16CR1).
1
3
2
5
4
6
