User Manual
Aolynk EP302 IP Phone
6 FAQs
51
I.
rt?
upports two network access methods: DHCP and static IP address.
II
The
s not. So the EP302
f the Ethernet access device to which the EP302 is attached
supports PoE, you can connect one end of the network cable to the LAN port of the
E port of the access device. In this case, the
II
The EP302 works with an IP PBX (XE series server). The PBX IP is the IP address of
IV
6
FAQs
Contact your network administrator first if you have any problem in installing or using
the EP302.
Sections below describe the frequently asked questions and answers.
What network access methods does the EP302 suppo
The EP302 s
. How can I have my EP302 powered through PoE?
LAN port of the EP302 supports PoE, while the PC port doe
can be powered through the LAN port and the network cable without the need of an
external power supply. I
EP302 and the other end to the Po
EP302 is powered by the Ethernet access device through the network cable.
I. What is a PBX IP?
the IP PBX.
. How can I enter alphabetic characters in the LCD configuration mode?
Please refer to section
0
“
Input Method
”.
y doesn’t the
V. Wh
LCD light up after the power adapter is connected to the
z
A possible reason is that the output voltage of the power adapter does not meet
d
requirement.
phone?
the phone’s requirement. Check whether the AC input is within the require
range and whether the power adapter meets the
z
Another possible reason is that the LCD is faulty. Please contact the network
administrator for LCD troubleshooting and maintenance.
