User Manual
Aolynk EP302 IP Phone
4 Using the Phone
33
Step
Operation
Illustration
2
Press the
CONFERENCE
key
to put the call with user A on
hold. A prompt appears
asking you to enter the
telephone number of another
party (user B).
3
Enter user B’s telephone
number and press
CONFERENCE
.
4
A conference call indicator
and the conference call
duration appear after user B
answers the call (or after the
call is forwarded to the voice
mailbox).
Note:
In step 3
，
if the call connection with user B fails or if user B does not answer the call,
the line will be automatically switched to the call hold state between you and user A.
You can press the
Call
soft key to resume conversation with user A.
4.10 Call Hold
The call hold function allows you to answer or place a new call without terminating
the on-going call. When this function is used, neither party of the original call can
hear the other side.
To put a call on hold, use one of the following two methods.
Method 1:
Table 4-4
Operation steps
Step
Operation
Illustration
1
You are on an active call.
—
