User Manual
Aolynk EP302 IP Phone
2 Installation and Initial Setup
13
Description
LCD Displa
Step
y
9
Return to
6. Advanced Settings
and select
4. Account Info
. Enter
the phone number and password,
and then press
OK
.
Note: For EP302-XE2000, you also
need to enter information for the
phone user.
10
Press the
Back
soft key twice. The
message “Registration Succeeded”
appears and then the phone returns
to the standby mode. The initial
setup is now complete and the
phone is ready for use.
EP302-XE7000:
EP302-XE2000:
II. Access with a static IP address
If the phone accesses the network with a static IP address, set up your phone as
follows (the IP addresses in the following figures are only for demonstration
purpose):
Note:
z
Each menu item has a number before it. You can display a screen by entering the
corresponding number.
z
Between step 2 and step 11 (before you come to the standby screen), you can
return to the upper level menu or cancel the current settings by pressing the
MENU
key, or save the settings by pressing the # key.
z
Make sure that you have obtained all necessary information from your network
administrator for configuring the EP302, and that you configure the settings
correctly. If any mistakes are made during the setup or if you cannot reach the
final standby screen, repeat the steps listed in the following table.
