Gyyr TLC2100-S16, Operating Instructions Manual

Page: 35 / 84

25 TLC2100-S16
1837-0700-4852542C
T/D and Trans. Search
Exit
Date: 01/01/97
Time: 12:00:00A
Trans. #: 0000
Start Search: No
Status:
Idle
Parameters:
Start Search:
Yes, No
Status: Searching, Located Match, Approximate Match, Hit BOT,
Hit EOT, No Time Code, Idle, No Transaction Found
The T/D (Time/Date) and Trans. (Transaction) Search submenu operates in the same
manner as the Time/Date Search and the Transaction Search submenus, except you
search by entering both the time and date and the transaction number. This results in
a much shorter search time than for Transaction Only searches. If the Transaction
Number exists within a search window of ± 5 minutes of tape (played at normal speed)
from the entered time and date, the transaction will be found. Otherwise the status will
display “No Transaction Found”.
Encoding Options
Exit
Code Pos: DigiScan
Trans. # Length: 4
Parameters:
Code Pos:
DigiScan, Normal
Trans. # Length: 4 through 9 characters
This menu allows the user to set the transaction number character length.
The Code Pos line is typically set to DigiScan. Only set to Normal if you do not wish to
encode a camera # for reviewing with a DigiScan multiplexer.
T/D and Trans. Search
Submenu
Encoding Options
Submenu