manualshive.com logo in svg

Gyyr TLC2100-S16, Operating Instructions Manual, Page: 14 / 84

Share
Download
Gyyr TLC2100-S16 Operating Instructions Manual Download Page 14

4

TLC2100-S16

1837-0700-4852542C

9

FIELD REVERSE
Press to reverse the tape by one field in the STILL playback mode.

10

STILL
Press to temporarily stop tape motion in the PLAY mode.

11

FIELD FORWARD
Press to advance the tape one field in the STILL playback mode.

12

REVERSE PLAY
Press to play recorded material at 02, 72, 120, 180, 240, 360, 480, 600, 720, or 960
hours during the PLAY mode.

13

REWIND/SEARCH
Press to rewind. If pressed during PLAY mode, the recorder will perform a high
speed reverse playback (search). Search speeds are variable and selectable. See the
“System Options: Search Speed” section of this manual for more information.

14

FAST FORWARD/SEARCH
Press to activate fast forward. If pressed during PLAY mode, the recorder will
perform a high speed forward playback (search). Search speeds are variable and
selectable. See “System Options: Search Speed” section of this manual for more
information.

15

STOP
Press to stop the tape. This button must be pressed to end the RECORD mode.

16

PLAY

Press to play recorded material. PLAY speeds are 02, A18, A24, 24, 48, 72, 120, 180,
240, 360, 480, 600, 720, and 960 hours. The Play button is also used for the Record
Check function. See the “Record Check” section of this manual for more informa-
tion.

17

RECORD
Press to start recording. RECORD speeds are 02, 18, 24, 48, 72, 120, 180, 240, 360,
480, 600, 720, and 960 hours.

Play/Record
Operations
Controls

Follow this procedure for the
best results when reviewing a
time-lapse recorded tape:

1. With the VCR in PLAY (#16),
and without a particular event
in mind, place the VCR in the
2-hour speed. This is the
fastest playback speed and
can usually be used quickly to
locate an event.

2. Once an event has been
identified, slow the unit to 24-
hour, 48-hour or any other
slower speed. These slower
speeds will allow close
examination of the situation
and ample time to react.

3. Select the STILL (#10) mode
to stop the tape. Use FIELD
FWD (#11) or FIELD REV (#9)
to get the exact field you wish
to review.

10

EJECT

REC

FIELD

REV

STILL

FIELD

FWD

REVERSE

PLAY

REW/

SEARCH

F. FWD/

SEARCH

11

9

12

13 14

15

16

17

REC

STOP

PLAY

Summary of Contents for TLC2100-S16





















































































Reviews:

No comments