Gyyr TLC2100-S16, Operating Instructions Manual

Page: 18 / 84

8 TLC2100-S16
1837-0700-4852542C
TAPE END
Lights when the end of the tape is reached during RECORD mode. When TAPE
END indicator is lit, the tape must be ejected in order to turn off the TAPE END
indicator in the display. Tape must be ejected and reinserted before the Record
function will operate.
Will NOT light when RE-REC, EVEN IF ALARM has been selected in the “ALARM
RECORD OPTIONS” menu. See the “Alarm Record Options Submenu” section of
this manual for more information.
OR
Will NOT light if an alarm recording has not been made and RECYCLE, STOP IF
ALARM was selected from the “ALARM RECORD OPTIONS” menu.
TIMER INDICATOR
Lights during Timer recording and also when unit is in STOP mode.
Flashes when Timer mode is entered and one or more of the following conditions
exists:
• A cassette is not loaded.
• A cassette without a safety tab is loaded.
• The Timer has not been programmed.
LOCK INDICATOR
Lights when the recorder is in the Security Lock mode. All front panel controls are
disabled when lock indicator is lit.
B, R
B or R will light when the Brown (+azimuth) head or Red (-azimuth) head mode
is selected in the System Options submenu.
DIGITAL COUNTER (0000)
Shows the tape time counter. Each digit incremented represents 1 second of time
in 2-hour speed. If the counter is reset to 0000 at beginning of tape, a T120 cassette
will increment the counter to approximately 7200 at end of tape. In modes other
than RECORD, the counter will increment or decrement only where a recording
was made, i.e., when going over a section of blank tape, the counter will not
change.
TAPE SPEED INDICATOR (000), SPEED ANNUNCIATOR
Displays the selected Tape Speed. The Speed annunciator will light in conjunction
with the Tape Speed Indicator.