14
AIR BIKE PRO
EQUIPMENT MAINTENANCE
•
Use a dampened soft-cloth to wipe equipment free of perspiration after each use. Avoid getting
excessive moisture on computer or electronic components. Do not use abrasive cleaners or
petroleum-based solvents to clean equipment.
•
Do not remove drive train shrouds or attempt any technical service on equipment without
consulting an authorized service representative.
• Regularly inspect product for lose assembly hardware and worn components.
•
(If applicable) For added safety, unplug equipment from the wall socket when it is not being
used.
•
Use a product /exercise mat underneath equipment for protection of floors & carpets.
• (If applicable) Apply recommended component lubricants at the required time periods.
•
Keep product assembly manual, purchase receipt, and service records in a safe storage place.
•
(If applicable) Periodically check batteries for proper voltage output & replace as needed.
• Do not store or use equipment outdoors.
•
Moving equipment: Lift up the rear stabilizer and carefully tip the bike forward until the front
stabilizer wheels touch the floor. Do not use the computer or pivot arms to move the unit. You
may wish to lock the fan in place (which will keep the arms from moving), by turning the safety
knob until it makes contact with the fan wheel.
Service
Daily
Monthly
Quarterly Annually
Clean/Dry Frame & Console w/ mild soap and cloth
X
Inspect Unit for Noise or loose components
X
Ensure Unit is level-Adjust Stabilizer Feet
X
Tighten Crank & Bell Crank Bolts, Tighten Pedals
X
Tighten Seat Bolts
X
Tighten Handlebars
X
Check and Tighten Linkage Arm Pivot points
X
Change Console Batteries
X
Lubricate Chain
X
Inspect & Adjust Chain Tension if Needed
X
Tighten Main Frame Bolts and Stabilizers
X
PREVENTATIVE MAINTENANCE
