9
AIR BIKE PRO
ASSEMBLY INSTRUCTIONS
STEP 2.
A)
Carefully route the Sensor Cable (#4) through the Computer Mast (#6) and slide the mast down
onto the corresponding mounting area of the Base Frame Assembly. Secure the mast to the base
frame using 2-Button Head Allen Bolts (#22), 2-Spring Washers (#23), and 2- Washers (#24).
B)
Install Batteries into the back of the Computer (#5), Connect the Sensor Cable (#4)
to the receptacle end of the cable coming from the back of the computer. Tuck the excess cable
length into the mast and slide the computer onto the mast mounting plate. Secure the computer in
place using 2-Bolts (#25).
Assembly Step #2 completed.
Assembly hardware required:
#22 Button Head Allen Bolt
Qty. 2
#23 Spring Washer
Qty. 2
#24 Washer
Qty. 2
