TECHNICAL DATA
a) If you are unsure about whether the product is
operating correctly or if you find damage, please
contact the manufacturer’s service centre.
b) Only the manufacturer’s service centre may make
repairs to the product. Do not attempt to make
repairs yourself!
c)
Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
The terms „device“ or „product“ are used in the warnings
and instructions to refer to Basketball Stand.
EN USER MANUAL
Parameter description
Parameter value
Product name
Basketball Stand
Model
GR-BS12
Weight [kg]
12,3
Rim diameter [cm]
43
Backboard dimensions
[cm]
91x60,5x2,8
Base dimensions [cm]
89x59x17,5
Height adjustment
range[cm]
190-260
d) Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
e)
Keep packaging elements and small assembly parts
in a place not available to children.
f)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/or knowledge unless they are supervised by
a person responsible for their safety or they have
received instruction on how to operate the device.
g)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
h)
When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country
where the device will be used.
i)
Cleaning and maintenance may not be carried out by
children without supervision by an adult person.
j)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
k)
Keep the device away from sources of fire and heat.
l)
Do not use the product if its base is not completely
filled.
m) Do not climb onto the base and other elements of
the product or hang from the rim as it may cause
serious injury.
n)
Only adults can change the location of the device
and make adjustments.
o)
Drain water from the base before the temperature
approaches or drops below freezing point. Frozen
water can damage the base.
p) Excessive or improper use of the product may
damage its components, which may result in
property damage or injury.
q)
Do not use the product during difficult weather
conditions, especially in strong winds.
r)
Do not wear any jewellery while playing.
s)
Do not push the base into the ground, as it may
damage the product.
3. USE GUIDELINES
The use of the product is playing basketball. The product is
not intended for commercial use.
The user is liable for any damage resulting from
unintended use of the device.
Name
Size
[mm]
Drawing
Quan
-
tity
1
Back-
board
-
1
17 Screw,
wash-
ers, nut
M8
*65
3
The set does not include:
Symbol
Name
Drawing
S/W
Sand or water
3.2. PREPARING FOR USE
APPLIANCE LOCATION
Before the device assembly, select a smooth and stable
surface, without elements that could damage or puncture
the base. The product is made of durable materials, so it
can be assembled and used outdoors.
ASSEMBLING THE APPLIANCE/ASSEMBLING THE DEVICE
PLEASE NOTE: Assembly should always be done by two
people!
1.
Fix the castors and the bottom of the post.
2.
Screw the lower crossbars to the base and to the
bottom of the post..
3.
Fill the base with sand or water, then plug the inlet.
PLEASE NOTE: While filling the base with sand, pay
special attention to spread it evenly and fill the entire
base.
4.
Insert the middle part of the post into the bottom
part and attach it with screws.
5.
Attach the net to the rim.
6.
Attach the rim to the front of the backboard using
a screw, and secure it with a nut at the back of the
board.
7.
Insert the top part (with the backboard and the rim)
into the middle part of the post, and lock it with the
knob.
8.
If the product needs to be moved, perform this
operation according to the following instructions.
PLEASE NOTE: Failure to follow instructions and
warnings may result in serious injury and damage to
the product.
3.3. DEVICE USE
PLEASE NOTE: Persons assembling and using the product
ought to read the instructions, and the device owner must
ensure that all users observe the safety rules.
3.4. CLEANING AND MAINTENANCE
a)
Use only non-corrosive cleaners to clean the surface.
b)
The device must be regularly inspected to check its
technical efficiency and spot any damage.
c)
Use a soft, damp cloth for cleaning.
d)
Check all components for rust, chipping or cracked
paint. If present, proceed as follows:
•
remove rust or paint splinters using sandpaper
•
wash the entire area with a damp cloth and wipe dry
•
apply two layers of high-gloss enamel paint onto the
entire area; remember to let the first coat dry before
applying another
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines, using state-of-the-art technologies and
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
LEGEND
PLEASE NOTE!
Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is written in German. Other
language versions are translations from the German.
2. USAGE SAFETY
ATTENTION!
Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in serious injury or even
death.
The product satisfies the relevant safety
standards..
Read instructions before use.
ATTENTION!
Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3.1. DEVICE DESCRIPTION
Elements of the set
ATTENTION!
This product’s exploded view can be
found on the last pages of the operating instructions
(pp. 22-27).
2
Hoop
-
1
3
Net
-
1
4
Wrench
-
es and
Allen
keys
-
4
5
Knob
-
1
6
Top
part
of the
post
-
1
7
Middle
part
of the
post
-
1
8
Bottom
of the
post
-
1
9
Base
-
1
10 Axle
-
1
11 Castor -
2
12 Bottom
cross-
bar
-
2
13 Plug
-
1
14 Screw,
wash-
ers, nut
M8
*70
1
15 Screw,
wash-
ers, nut
M6
*16
4
16 Screw,
wash-
ers, nut
M5
*35
4
6
7
24.02.2020
