4
The Button-Press function
1)
For European standard:
1. „70 °C“ button: Press this button, the target water temperature will be set
at 70 °C;
2. „80 °C“ button: Press this button, the target water temperature will be set
at 80 °C“;
3. „85 °C“ button: Press this button, the target water temperature will be set
at 85 °C;
4. „90 °C“ button: Press this button, the target water temperature will be set
at 90 °C;
5. „95 °C“ button: Press this button, the target water temperature will be set
at 95 °C“;
6. „100 °C“ button: Press this button, water will be heated to boiling;
7. „START“ button: Power on, start working, power off;
8. „Keep WARM“ button: Start or turn off warm function;
Operating Instructions
Preparatory work:
Put the kettle base on the stable countertop and plug into
at nominal voltage. Add water to the kettle for heating and keep water below
the Max mark of water line.
1. When plug in the kettle, all the working indicator lights will turn on (called
complete inspection), the buzzer will have a warning sound and then go
into the standby mode.
2. When in standby mode, if pressing down any one of the temperature
buttons, the corresponding temperature will be set. Then it begins to
heat water by pressing down “START/STOP”. When reaches the target
temperature, it will stop working.
3. When in standby mode, it will directly heat water to boiling by only
pressing “START/STOP” button.
4. When in standby mode, by pressing down “KEEP WARM” button, the
kettle will go into the “keep warm” mode. At this time, if you then press
“START/STOP” button, the temperature will go up, after reaching the
target temperature, it will go into “KEEP WARM” mode which lasts for 30
minutes.
5. When the kettle is on working, by pressing other temperature button, you
can choose to set the corresponding temperature. Such as, by pressing
“KEEP WARM” button, the “KEEP WARM” function can be started or
stopped. By pressing “START/STOP” button, current working can be
stopped.