Guilin Woodpecker Medical Instrument Fi-E, Instruction Manual

Page: 20 / 25

18
Gutta-percha cannot flow
out from the needle
1. The push ram has
been pushed to the end,
indicating that the gutta-
percha has run out.
2. The pushing ram seal
ring is damaged.
3. The needle is damaged
and blocked.
1. Pull back the pushing
ram and load a new gutta-
percha stick.
2. Replace the pushing
ram.
3. Replace the needle.
Automatic shutdown
If there is no operation for
5 minutes, the device will
automatic powers off
Reboot
The Gutta Percha Injecting
Needle cannot be taken
out.
The injecting needle
and the pushing ram are
comented by the cooling of
the gutta-percha.
1. Power on and set the
temperature to 150 °C.
After the temperature
reaches the set value,
use the wrench to turn
counterclockwise to take
out the Gutta Percha
Injecting Needle .
2.Contact your local dealer
or our company.
Charging failure after
connecting to power
supply.
1. The power supply is not
correctly connected.
2. The power supply
is damaged, or the
specification doesn’t
match.
3. There are impurities
on the contact thimble of
charging base.
1.Unplug and reconnect.
2.Replace the battery.
3.Wipe the thimble with
alcohol under the premise
of power failure.
The service time after each
charging is shortened.
The battery capacity
becomes smaller.
Send to the repair center.
11 After-sales service
Since the date of sales, if the device cannot work normally for quality
problem, our company will be responsible for the repair of device during
the warranty period. Please refer to the Warranty Card for warranty period
and warranty scope.
12 Environment protection
The device does not contain any harmful ingredients. It can be handled or
destroyed in accordance with the relevant local regulations.
Note:
1) Without Woodpecker agreement and authorization, private modification
of device may result in the electromagnetic compatibility problem of that