l
11
Main Screen and Bird's Eye
View (BEV)
The circular BEV depicts the operational area of
the RangeGuard Monopole system from above.
Vessel Outline
The length and breadth of the vessel can be
configured on the Vessel tab of the RangeGuard
Service Interface (see Installer’s Guide) so that the
vessel outline is correctly scaled and positioned
on the BEV.
Sensors
The black squares on or around the vessel
outline represent the RangeGuard Monopole
sensors. Their position and orientation relative
to the vessel are configurable using the
RangeGuard Service Interface (see Installer’s
Guide).
The field of view (FOV) of each sensor is indicated
by the shaded area radiating from each of the
sensors. When blanking is configured at short
range the shaded areas are offset to illustrate the
blind spots. Only areas where the two sensor
FOVs overlap are considered for target tracking.
Reference Point
The red dot on or near the vessel outline is
the reference point. This does not necessarily
correspond to a physical object, but is the point
in relation to which the range and bearing of the
target are expressed. The reference position
is configurable using the RangeGuard Service
Interface (see Installer’s Guide).
Target
The target is always at the centre of the BEV
and only available for RangeGuard Monopole
systems.
Screen Layout (Continued)
Summary of Contents for RangeGuard Monopole
Page 41: ......
