GB
Please read carefully the following Operating Instructions before putting the appliance into operation
A.V. 2 Any reprints, even partial, are subject to approval. Technical changes reserved.
Illustrative pictures!
Translation of original operating instructions.
GB
Do you have any technical questions
?
Any claim? Do you need any spare parts or operating instructions
?
We will quickly help you and without needless bureaucracy at our home page
www.guede.com
in the Service part. Please help us be able to
help you. In order to be able to identify your appliance in case of claim, we need the serial No., Order No. and year of production. All this data
can be found on the type label. Please enter the data below for future reference.
Serial No.: Order No.: Year of production:
Tel.:
+49 (0) 79 04 / 700-360
Fax:
+49 (0) 79 04 / 700-51999
E-Mail:
Sighs on Unit
Meaning of Symbols
Symbols shown below are used throughout this manual
and/or on the unit:
Product Safety:
Product compliance with
respective EU standards
Bans:
General ban (in combination with
another pictograph)
Do not reach in rotating parts
Do not use the unit in rain
No pulling the cable
Precaution:
Warning/caution
Commands:
Read operating manual before
use
Use protection gloves
Wear goggles. Use ear
protectors
Environment Protection:
Wastes to be disposed of in a
professional manner not to harm
the environment
Cardboard packaging to be
collected for recycling.
Faulty and/or disposed of
electrical/electronic appliances to
be collected by authorised
salvage places
Packaging:
Protect from moisture
Keep Up
Fragile
Technical Data:
Engine power
Connection
Revolutions
Ø circular saw blade
Cutting width at 90°
Cutting width at 45°
Weight
Appliance
GRK 250/300 LP radial arm saw
Radial arm and mitre saw with laser for precision cutting,
double guidance
, saw support and table out of pressure cast
aluminium, radial guidance embedded in ball bearings for
easy pulling in of the cut material, clamping mechanism with
possible double-sided use, big turn table with grid fixation,
optional inclination to both sides at 0-45° angle, saw
head can be inclined at 45° angle
, big dust bag or exhaust
connection.
Including cemented carbide circular saw
blade, all with a support.
Scope of Delivery (Fig. 1)
1.
Hand grip and a switch
2.
Carbon brush guard
3.
Tripping lever
4.
Scale with angle adjustment
5.
Saw table
6.
Mounting holes
7.
Table extension equipment
8.
End stop
9.
Sawdust collecting bag
10.
Circular saw blade mounting
11.
Locking button
12.
Circular saw blade guard
13.
Locking lever for chamfer cutting
9
