GÜDE Expert Power Control 8291, Manual

Page: 76 / 91

76
Expert Power Control 8291 © 2020 GUDE Systems GmbH
Specifications
timer syslog facility show show s facility level for timer syslog
timer syslog verbose set {0..7} sets verbose level for timer syslog
timer syslog verbose show show s verbose level for timer syslog
timer {rule_num} enabled set {OFF=0|ON=1} enables rule
timer {rule_num} enabled show show s if rule is enabled
timer {rule_num} name set "{name}" sets name of rule
timer {rule_num} name show show s name of rule
timer {rule_num} {FROM=0|UNTIL=1} set "{yyyy-
mm-dd}"
sets date range of rule
timer {rule_num} {FROM=0|UNTIL=1} show show s date range of rule
timer {rule_num} trigger jitter set {0..65535} sets jitter for rule
timer {rule_num} trigger jitter show show jitter of rule
timer {rule_num} trigger random set {0..100} sets probability for rule
timer {rule_num} trigger random show show s rule probability
timer {rule_num} trigger {HOUR=0|MIN=1|SEC=2|
DAY=3|MON=4|DOW=5} set "{time_date_list}"
sets time date list
timer {rule_num} trigger {HOUR=0|MIN=1|SEC=2|
DAY=3|MON=4|DOW=5} show
show s time date list
timer {rule_num} action mode set {SWITCH=1|
CLI=2}
sets sw itch or cli cmd
timer {rule_num} action mode show show s if sw itch or cli cmd
timer {rule_num} action {SWITCH1=0|SWITCH2=1}
{OFF=0|ON=1} set "{port_list}"
sets port list for sw itch cmd
timer {rule_num} action {SWITCH1=0|SWITCH2=1}
{OFF=0|ON=1} show
show s port list for sw itch cmd
timer {rule_num} action delay set {0..65535} delay betw een cmds
timer {rule_num} action delay show show s delay betw een cmds
timer {rule_num} action console set "{cmd}" sets cmd string
timer {rule_num} action console show show s cmd string
timer {rule_num} action hash set "{data}" sets action binary form
timer {rule_num} action hash show show s action binary form
timer {rule_num} delete delete one timer
timer delete all delete all timer
vt100 enters cmd group "vt100"
vt100 echo set {OFF=0|ON=1} sets console echo state
vt100 echo show show s console echo state
vt100 numeric set {OFF=0|ON=1} sets numeric mode
vt100 numeric show show s numeric mode state
vt100 reset resets terminal
Notes
1. Legacy - The command has been replaced by a newer version
2. Command can be entered on any level
3. The output may show 2 lines - the 1st line shows the actual state, the 2nd line the
status after reboot
4. The output may show several lines
5. Please see the
Energy Sensor Table for the right energy index
6. Please see the External Type and External Sensor Field Tables for the correct
sensor index
Energy Sensor Table "{energy_sensor}"
Index Description Unit
0 Forward Active Energy Wh
1 Power Active W
2 Voltage V
3 Current A