GÜDE Expert Power Control 8291, Manual

Page: 63 / 91

63
Expert Power Control 8291 © 2020 GUDE Systems GmbH
Specifications
You will find a complete list of all possible device commands in the chapter "Cmd Over-
view".
Parameter
If parameters are expected for the command, the parameter may be passed as numeric
or constant. If e.g. you get the following line as help:
http server set {http_both=0|https_only=1|http_only=2}
the following instruction pairs are equivalent:
http server set https_only
http server set 1
or
http server set https_both
http server set 0
Numerical parameters can be entered with different bases. Here is an example of the
decimal value 11:
Base Input
decimal (10) 11
hexadecimal (16) 0xb
octal (8) 013
binary (2) 0b1011
Bit Field Parameter
Some parameters can take several values at the same time. In the following example, all
values between 0 and 5 can be set. In the help, this can be recognized by the fact that
the values are not separated by the "|" character, but by commas.
"{EVT_SYSLOG=0,EVT_SNMP=1,EVT_EMAIL=2,EVT_SMS=3,EVT_GSMEMAIL=4,EVT_BEEPER=5}"
To set EVT_SYSLOG and EVT_EMAIL in a command, you can use the following syn-
tax:
>extsensor 1 2 0 events type set "EVT_SYSLOG,EVT_EMAIL"
OK.
or numeric
>extsensor 1 2 0 events type set "0,2"
OK.
Additionally you can set all values with "ALLSET" or encode any bit pattern as hexa-
decimal with a syntax like "#7f1a".
Return Values