GÜDE Expert Power Control 8291, Manual

Page: 68 / 91

68
Expert Power Control 8291 © 2020 GUDE Systems GmbH
Specifications
mode set {CONTINOUS=0|INTERMITTENT=1}
bank {bank_num} {energy_sens} events beeper
mode show
show s beeper tone
bank {bank_num} {energy_sens} maxval set
{float}
sets maximum value for sensor
bank {bank_num} {energy_sens} maxval show show s maximum value for sensor
bank {bank_num} {energy_sens} hyst set {float} sets hysterese value for sensor
bank {bank_num} {energy_sens} hyst show
show s hysterese value for sensor
bank {bank_num} {energy_sens} publish mode
set {NONE=0|INTERVAL=1|DIFFERENCE=2}
sets publish mode
bank {bank_num} {energy_sens} publish mode
show
show s publish mode
bank {bank_num} {energy_sens} publish trigger
set {float}
sets trigger value for publish
bank {bank_num} {energy_sens} publish trigger
show
show s trigger value for publish
bank {bank_num} {energy_sens} {BELOWMIN=0|
ABOVEMIN=1|ABOVEMAX=2|BELOWMAX=3} port
set {port_num}
sets pow er port for sensor values action
bank {bank_num} {energy_sens} {BELOWMIN=0|
ABOVEMIN=1|ABOVEMAX=2|BELOWMAX=3} port
show
show s port for sensor values action
bank {bank_num} {energy_sens} {BELOWMIN=0|
ABOVEMIN=1|ABOVEMAX=2|BELOWMAX=3}
state set {OFF=0|ON=1|DISABLED=2}
sets state for sensor values action
bank {bank_num} {energy_sens} {BELOWMIN=0|
ABOVEMIN=1|ABOVEMAX=2|BELOWMAX=3}
state show
show s state for sensor values action
clock enters cmd group "clock"
clock enabled set {OFF=0|ON=1} enables ntp
clock enabled show show s if ntp enabled
clock timezone set {minutes} sets timezone
clock timezone show show s timezone
clock dst enabled set {OFF=0|ON=1} enables dst
clock dst enabled show show s if dst is enabled
clock manual set "{hh:mm:ss yyyy-mm-dd}" sets time and date manually
clock show show s actual time and date
clock ntp server {PRIMARY=0|BACKUP=1} set
"{dns_name}"
sets ntp server name
clock ntp server {PRIMARY=0|BACKUP=1} show show s ntp server name
console enters cmd group "console"
console version show s unique console version number
console telnet enabled set {OFF=0|ON=1} enables telnet on/off
console telnet enabled show show s if telnet enabled
console telnet port set {ip_port} sets telnet port
console telnet port show show s telnet port
console telnet raw set {OFF=0|ON=1} sets raw mode (disables editing) on/off
console telnet raw show show s if raw mode enabled
console telnet echo set {OFF=0|ON=1} enables echo on/off
console telnet echo show show s if echo enabled
console telnet activeneg set {OFF=0|ON=1} enables telnet active negotiation (IAC) on/off
console telnet activeneg show show s if active negotiation enabled
console telnet login set {OFF=0|ON=1} enables login on/off
console telnet login show show s if login enabled
console telnet login local set {OFF=0|ON=1} enables local login on/off
console telnet login local show show s if local login enabled
console telnet login radius set {OFF=0|ON=1} enables login for RADIUS on/off
console telnet login radius show show s if RADIUS login enabled
console telnet login delay set {OFF=0|ON=1} enables delay (after 3 login fails) on/off
console telnet login delay show show s if login delay enabled
console telnet pushmsgs config set {OFF=0|
ON=1}
enables persistent push msgs
console telnet pushmsgs config show show s if persistent push msgs are enabled