GÜDE Expert Power Control 8221 Series, Manual

Page: 34 / 115

34
Expert Power Control 8221/8226 © 2022 GUDE Systems GmbH
Configuration
Enable Telnet: Enables the Telnet console.
Telnet TCP port: Telnet sessions are accepted on this port.
Raw mode: The VT100 editing and the IAC protocol are disabled.
Active negotiation: The IAC negotiation is initiated by the server.
Activate echo: The Telnet echo setting if not changed by IAC.
Push messages: Sends push messages via SSH.
Delay after 3 failed logins: After 3 wrong entries of username or password, the next login
attempt is delayed.
SSH
Enable SSH: Enables the SSH protocol.
SSH TCP port:
Port on which SSH sessions are accepted.
Activate echo: The echo setting for SSH.
Push messages: Sends push messages via SSH.
SSH and Telnet
Require user login: Username and password are required.
Use radius server passwords: Username and password are validated by a Radius Sever.
Use locally stored passwords: Username and password are stored locally.
Upload SSH public key: Input field for public key.
Delete public key: Setting this at Apply deletes the public key.