GÜDE Expert Power Control 8041 Series, Manual

Page: 70 / 118

70
Expert Power Control 8041/8045 © 2022 GUDE Systems GmbH
Specifications
There are several command levels. The following commands are usable from each level:
back go back one level
help all commands of the actual level
help all show all commands
logout logout (only when login required)
quit quit console
The "help" command returns all the commands of the current level. If "help" is called
from the top level, e.g. the line "http [subtopics]" appears. This means that there is an-
other level for "http". With the command "http help" all commands below "http" are
shown. Alternatively, with entering "http" you can select the http level, and "help" shows
all the commands on the selected level. The command "back" again selects the top
level. It is possible to use "help" at any position: "http passwd help" provides all com-
mands that have the prefix "http passwd".
You will find a complete list of all possible device commands in the chapter "Cmd Over-
view".
Parameter
If parameters are expected for the command, the parameter may be passed as numeric
or constant. If e.g. you get the following line as help:
http server set {http_both=0|https_only=1|http_only=2}
the following instruction pairs are equivalent:
http server set https_only
http server set 1
or
http server set https_both
http server set 0
Numerical parameters can be entered with different bases. Here is an example of the
decimal value 11:
Base Input
decimal (10) 11
hexadecimal (16) 0xb
octal (8) 013
binary (2) 0b1011
Bit Field Parameter
Some parameters can take several values at the same time. In the following example, all
values between 0 and 5 can be set. In the help, this can be recognized by the fact that
the values are not separated by the "|" character, but by commas.