GÜDE Expert Power Control 8041 Series, Manual

Page: 102 / 118

102
Expert Power Control 8041/8045 © 2022 GUDE Systems GmbH
Specifications
0 16-bit Number of Ports (Relay)
1 16-bit Number of Ports (Outlets) with
Energy Measurement
2 16-bit Number of Banks
3 16-bit Number of Line-In
4 16-bit Phases per line
5 16-bit Number of Inputs
Sensor Type Description
Address Width Information
0x080 to 0x083 16-bit (signed CPU Sensor values
0x100 to 0x1ff 16-bit (signed) external Sensors
0x400 to 0x39ff 32-bit (signed) Line Energy Sensors
0x3a00 to 0x81ff 32-bit (signed) Port Energy Sensors
0x8200 to 0x823f 16-bit (signed) Bank Energy Sensors
0x8240 to 0x827f 16-bit (signed) Power Source Energy Sensors
0x8280 to 0x82cf 16-bit (signed) Residual Current Monitor
CPU Sensor Values
Offset Sensor Field Unit
0 Vsystem 0.01 V
1 Vaux 0.01 V
2 Vmain 0.01 V
3 CPU Temperature 0.1 °C
External Sensors:
The measured value of the external sensors are coded as fixed point arithmetic. For a
factor of e.g. 0.1 in the unit the value must be divided by 10 in order to reach the real
measured value. A value of 0x8000 means that no sensor is plugged into the corres-
ponding port, or the corresponding field in the sensor is not available. The formula for the
address is (the port numbers start at zero):
0x100 + Port * 8 + Offset
In the Expert Sensor Box 7213 / 7214 the internal sensor corresponds to the value
Port = 0, and is coded Port = 1 for Sensor 2 and Port = 2 for Sensor 3.
Offset Sensor Field Unit
0 Temperature 0.1 °C
1 Humidity 0.1 %
2 Digital Input bool
3 Air Pressure 1 hPa (millibar)
4 Dew Point 0.1 °C
5 Dew Point Difference 0.1 °C
For example, the humidity of the second port has the address: 0x100 + 1 * 8 + 1 =
0x109