GÜDE Expert Power Control 8041 Series, Manual

Page: 85 / 118

85
Expert Power Control 8041/8045 © 2022 GUDE Systems GmbH
Specifications
timer {rule_num} action console set "{cmd}" sets cmd string
timer {rule_num} action console show show s cmd string
timer {rule_num} action hash set "{data}" sets action binary form
timer {rule_num} action hash show show s action binary form
timer {rule_num} delete delete one timer
timer delete all delete all timer
vt100 enters cmd group "vt100"
vt100 echo set {OFF=0|ON=1} sets console echo state
vt100 echo show show s console echo state
vt100 numeric set {OFF=0|ON=1} sets numeric mode
vt100 numeric show show s numeric mode state
vt100 reset resets terminal
Notes
1. Legacy - The command has been replaced by a newer version
2. Command can be entered on any level
3. The output may show 2 lines - the 1st line shows the actual state, the 2nd line the
status after reboot
4. The output may show several lines
5. Please see the
Energy Sensor Table for the right energy index
6. Please see the External Type and External Sensor Field Tables for the correct
sensor index
Energy Sensor Table "{energy_sensor}"
Index Description Unit
0 Forward Active Energy Wh
1 Power Active W
2 Voltage V
3 Current A
4 Frequency 0.01 hz
5 Power Factor 0.001
6 Power Angle 0.1 degree
7 Power Apparent VA
8 Power Reactive VAR
9 Forward Active Energy Resettable Wh
10 Forward Reactive Energy VARh
11 Forward Reactive Energy Resettable VARh
12 Reset Time - sec. since last Energy Counter Reset s
13 Reverse Active Energy Wh
14 Reverse Reactive Energy VARh
15 Reverse Active Energy Resettable Wh
16 Reverse Reactive Energy Resettable VARh
17 Absolute Active Energy Wh
18 Absolute Reactive Energy VARh
19 Absolute Active Energy Resettable Wh
20 Absolute Reactive Energy Resettable VARh
21 Residual Current A
22 Neutral Current A
Whether the measured values "Residual Current" and "Neutral Current" are suppor-
ted depends on the respective device model.