GÜDE 95446, Translation Of The Original Instructions

Page: 42 / 112

38
F1 Robot is outside the boundary lines. Robot is outside the boundary wire? Boundary wire
is connected the wrong way round? Robot is too far
from the boundary.?
Check the cable connections and restart the robot
manually.
F2 Does not start after pressing the „Start“
button. Boundary line signal does not
light up.
Check the status LED of the charging station. If
the LED flashes red, the boundary line is broken or
the boundary wire is not connected to the station.
Please check the connection.
F3 Does not start after pressing the „Start“
button. - Poor charging contact
Clean the charging contacts and remove any
foreign objects. Place the robot back on the char-
ging station and let it charge fully. Restart the robot
while it is still on the charging station.
F4 Does not start after pressing the „Start“
button. - Battery voltage too low
Place the robot back on the charging station and let
it charge fully.
ENGLISH
EN