chain should stop if the starter is tripped. Have defective
switches replaced in an authorised servicing centre.
Pruning should be tried/trained on wood cutting rack
Do not use the pole pruner in windy weather or in a
storm.
Watch out for falling prunes and limbs. Check the tree
before pruning. Make space for the branches.
Do not use the pruner to cut annual shoots and shrubs.
Do not stand on a ladder or another unstable aid when
using the pruner Use both your hands when working with
the pruner Force the tool in a firm sustained manner. Do
not use the pruner to cut the branches, diameter of which
is bigger than that of the guide bar.
The others should be kept out of reach of the pruner
cutting end – and at a safe distance from the workplace
The pole pruner is not insulated! Do not use the pruner in
proximity of cable, electric or telephone lines. In result of
a voltage peak, the operator may get exposed to a fatal
risk! Always stand off at a distance of 10 meters from any
electric line. Observe the local regulations.
Never stand directly under the branch that is being cut.
Always stand away from the falling branches path.
Use the Electrical Branch chainsaw on the mains with
an undercurrent protection switch (FI)!
Emergency Action
Apply the first aid adequate to the injury and get qualified
medical assistance as quickly as possible. Protect the injured
person from more accidents and calm him/her down.
For the sake of eventual accident, in accordance with DIN
13164, a workplace has to be fitted with a first-aid kit. It is
essential to replace any used material in the first-aid kit
immediately after it has been used. If you seek help, state
the following pieces of information:
1. Accident
site
2. Accident
type
3. Number of injured persons
4. Injury
type(s)
Intended use
Electrical Branch Güde chainsaw is intended for
pruning/trimming of the tree branches. Failure to observe the
provisions of the generally applicable regulations and the
provisions of this manual, the manufacturer can not be held
responsible for any damage made.
Unpacking
1.
Remove the separate parts of the pruner from the outer
cardboard.
2.
Check the parts for the damages from transportation. If
any damaged or defective parts are found out, advise the
dealer, from whom you bought the pruner.
Area of use:
Care for woody plants up to the height of app. 5-6 m,
depending on the body height.
Entsorgung
Die Entsorgungshinweise ergeben sich aus den Piktogrammen
die auf dem Gerät bzw. der Verpackung aufgebracht sind. Eine
Beschreibung der einzelnen Bedeutungen finden Sie im
Kapitel „Kennzeichnung“.
Entsorgung der Transportverpackung
Die Verpackung schützt das Gerät vor Transportschäden. Die
Verpackungsmaterialien sind in der Regel nach
umweltverträglichen und entsorgungstechnischen
Gesichtspunkten ausgewählt und deshalb recycelbar.
Das Rückführen der Verpackung in den Materialkreislauf spart
Rohstoffe und verringert das Abfallaufkommen.
Verpackungsteile (z.B. Folien, Styropor®) können für Kinder
gefährlich sein.
Es besteht Erstickungsgefahr!
Bewahren Sie Verpackungsteile außerhalb der Reichweite von
Kindern auf und entsorgen Sie sie so schnell wie möglich.
Operating staff requirements
The operator must carefully read and understand the
Operating Instructions before using the appliance.
Qualification
No special qualification is necessary for using the appliance
apart from detailed instruction by an expert.
Minimum age
The appliance can only be operated by persons over 16 years
of age. An exception includes youngsters operating the
appliance within their professional education to achieve
necessary skills under trainer's supervision.
Training
Using the appliance requires only corresponding instruction by
a professional or reading the Operating Instructions. No
special training necessary.
Technical data
GAK 650 TELE
Connection :
230V
Frequency :
50 Hz
Protection type :
IP 32
Protection class :
ll
Max. output :
600W / P1
Guide bar length :
240 mm
Total length :
2400 – 2950 mm
Cutting length
180 mm
Oil tank :
0,2 l
Connection cable :
300 mm
Acoustic output level :
103 dB
Weight :
4,4 kg
Order No. :
95155
Transport and storage
If the Electrical Branch chainsaw is to be stored for a period
above 30 days, steps described below should be taken:
1.
Empty the oil tank.
2.
Remove and clean the guide bar and the chain. Clean the
guide bar and the chain by dipping it in kerosene solvent
or fine soap solution.
3.
Dry the guide bar and the chain.
4.
Put the chain in a tank filled with oil to prevent corrosion.
5.
Apply a thin oil layer on the guide bar.
6.
Wipe the Electrical Branch chainsaw interiors with soft
cloth wetted with fine soap solution.
7.
Store the Electrical Branch chainsaw at an elevated
locked place out of the reach of children.
8.
Store the Electrical Branch chainsaw in a plastic bag at a
dry place or put a cover on the guide bar.
Terms and definitions
Guide Bar:
A metal rail rising above the unit body. The guide
bar supports and guides the chain.
Backlash:
A dangerous backlash may occur when the guide
bar tip top quadrant touches an object while the chain is
moving. The guide bar is suddenly shot up and then in the
direction of the operator
Oil Lubrication System:
The guide bar and chain lubricating
system
Saw Chain (chain):
A chain loop with saw teeth cutting the
wood. The chain is motor-driven. The chain leans against the
guide bar.
Sprocket wheel:
a tooth gear driving the chain.
Switch:
a device closing and opening the electrical circuit to
the saw motor.
Switch lock:
A device to prevent switching when the unit is
unattended.
11