GÜDE 410/10/50 230 V, Operating Instructions Manual

Page: 34 / 48

Guarantee
Guarantee claims as per guarantee list attached.
Technical data
410/10/50 230 V
Connection:
230 V
Frequency / Protection:
50 Hz/IP 23
maximum performance
2,2 kW (P1)
Boiler Content:
50l
Maximum Suction:
ca. 375 l/min
Maximum pressure:
10 bar
Power supply:
ca. 270 l/min
Cylinders:
2
Noise value indication:
L
WA
95 dB
Weight:
ca. 48 kg
SKU: 50013
General safety instructions
The Operating Instructions need to be thoroughly read
before first use of the appliance. If you have any doubts
concerning the appliance connection and handling please
contact the producer (service department).
Installation instructions
•
Check whether the appliance has not been damaged
during transport.
•
Immediately report any damage to the carrier that has
supplied the compressor.
•
Before putting the appliance into operation, it is
necessary to check the oil level in the compressor
pump.
•
The compressor needs to be installed near an
appliance.
•
Long air ducts and long service cables (extension
cables) are not recommended.
•
Make sure the suction air was clean and with no dust.
•
Do not install the compressor in a humid or wet room.
•
The compressor can only be used in suitable rooms
(with good ventilation, ambient temperature of +5°C to
40°C). There must be no dust, acids, fumes, explosive
or inflammable gases.
•
The compressor is suitable to be used in dry rooms.
Using the compressor at places with spraying water is
inadmissible.
TO ENSURE HIGH SAFETY LEVEL, CAREFULLY
FOLLOW THESE INSTRUCTIONS:
Attention: Use with FI (safety switch against
stray current) only!
ATTENTION!
•
Keep the workplace clean and tidy.
Mess in the
workplace and work-table increases the risk of
accidents and injuries.
•
Pay attention to conditions of environment in
which you are working.
Do not use electric tools and
appliances in a humid and wet environment. Ensure
sufficient lighting. Do not expose electric tools to rain
or high air humidity. Do not switch electric tools on
near flammable liquids or gases.
• Do not let foreign people get near the machine.
Keep visitors and persons around, especially children
and ill or weak people in a safe distance you’re your
workplace.
• Ensure safe storage of tools.
Store machines you do
not use to a dry place, erected if possible, so they are
not accessible to other persons.
•
Always use the right appliance for every work.
Do
not use e.g. small appliances or equipment for works
that actually need to be executed with big appliances.
Use the appliances solely for purposes they have been
designed to. Do not overload the appliance!
• Beware of the feeder cable.
Do not pull the cable. Do not use
it for pulling the plug out. Keep the cable out of reach of
thermal sources, oil and sharp edges.
•
Avoid unintentional switching on.
Before connecting the
plug to socket always make sure the appliance is off on the
device switch.
•
Use only special extension cables outdoors.
For outdoor
use, you need special extension cables, suitable for this
purpose and properly marked.
•
Be always careful. Pay attention to what you are doing.
Use your common sense when working. Do not use electric
tools if you are tired.
• Beware of any damaged parts.
Inspect the appliance before
use. Are any parts damaged? In case of slight damage,
seriously consider whether the appliance is going to work
safely and faultlessly.
• Prevent electric shocks.
Prevent bodily contact with earthed
objects, e.g. water pipes, heaters, cookers and fridges.
•
Use approved parts only.
Use identical spare parts only at
maintenance and repairs. Contact an authorised service centre
for that purpose.
•
Warning!
Any use of accessories and extensions not explicitly
recommended in these Operating Instructions can represent a
threat to persons and objects.
•
Do not lean from your place
Avoid any abnormal poise. Ensure a safe posture and keep
continuous balance.
• Do not keep adjusting spanner in the appliance
Before switching on, check whether you have taken adjusting
spanners and tools away from the appliance.
Safety instructions for first putting into operation
•
First of all, pull the plug out of socket before any adjusting and
maintenance.
•
Children must not use the machine.
•
After removing the pack, check whether the appliance and all
its parts are in a perfect state.
•
Always wear protective glasses and ear protectors
Always wear protective glasses or corresponding protection of
eyes and ears. Never aim with the compressed air blast at
your body or other persons or animals. The air blast can speed
up foreign objects – they can dangerously let fly.
•
Always use protective equipment against electric shock
Do not use the compressor near water or in a wet
environment.
• Compressor shut-down
Before any repairs, revisions, maintenance, cleaning or
exchange of construction parts, disconnect the compressor
from voltage and completely decompress the air jet.
• Unintentional switching the appliance on
Do not transport the compressor if connected to voltage or if
the air jet is pressurised. Before connecting the compressor to
voltage make sure the pressure sensor switch is in the OFF
position.
•
Proper storage of the compressor
When the compressor is not used, store it to a dry place
protected against climatic influences. Keep out of reach of
children.
•
Working clothes
Do not wear wide pieces of clothes and jewels as they can get
caught in construction parts.
•
Careful maintenance of the compressor
Unconditionally follow all lubrication instructions.
Regularly check the line cord. If damaged, have it repaired or
replaced in the customer service centre. Make sure the outside
34