Guardall PX18, User Manual

Page: 34 / 52

PX Control Panel User Manual – Issue C
- 34 -
Event log only messages
Log Text Additional Data Display Text Event Description
Knock Circuit nnn Cct nnn Circuit first knock
Line Block NONE NONE SmartDial has reported a line
blocked condition
Line Fault 1 - 50 volts not present
2 - Line block test failure
3 - No acknowledge from
central station
4 - Main PCB LF input
5- SmartDial Fault NONE Communicator has reported a
line fault
Lockout Keypad n KP n Incorrect code attempt limit
reached on the keypad
Logged Off User nn , Keypad m Us nn , KP m User logged off keypad
Logged On User nn , Keypad m Us nn , KP m User logged on keypad
Managed Rst Keypad m KP m Managed reset code entered
Marginal Circuit nnn Cct nnn A Circuit is marginal
Mult. Alarm Circuit nnn Cct nnn Circuit has alarmed up to the
multiple alarm limit
Normal User nn , Conc m Us nn , m Isolate removed from a
concentrator
Normal User nn , Circuit mmm Us nn Cct mmm Bypass or isolate removed from a
circuit
PC Access User 00 Us nn A GSR user has logged on
remotely.
Power Fail NONE (see note) NONE Supply voltage has
fallen to the power fail threshold
Pre-Warning Circuit nnn Cct nnn A circuit has been alarmed during
the entry period
Reprogrammed User nn , Keypad m Us nn , KP m A configuration option(s) has
been changed
Reset Circuit nnn Cct nnn An area has been reset
Reset User nn , Area m Us nn , Us nn An area has been reset
Clear Circuit nnn Cct nnn A Circuit alarm has cleared.
Restored Code(s) User nn , Keypad m Us nn , KP m All codes have been restored to
default
Set User nn , Area m Us nn A m Area has been set by a user
Shunt Off Circuit nnn Cct nnn A master shunt circuit or the
event programmer schedule has
removed the shunt from a circuit
Shunt On Circuit nnn Cct nnn A master shunt circuit or the
event programmer schedule has
shunted a circuit
Soak Alarm Circuit nnn Cct nnn A circuit on soak test has
alarmed
Soak Failed Circuit nnn Cct nnn At the end of the soak period any
circuit which has alarmed is
logged as failed
Soak Off Circuit nnn Cct nnn A circuit has been taken off soak
Soak On Circuit nnn Cct nnn A circuit has been put on soak
Software Error N N A software error has been logged
Temp Bypass Circuit nnn Cct nnn A circuit has been temporarily
(until clear) bypassed
TX On N N TX channel N on
TX Off N N TX channel N off
Unset User nn , Area m Us nn A m A user has unset the area
Intelligent Security & Fire Ltd