- 70 -
This window allows the user to enable/disable alarm output on a weekly basis. The table
represents days of the week from Sunday to Saturday located vertically and hours of the
day from 0 to 24 on the horizontal line. Color encoding has two options: White stands for
the time when alarm is disabled, and Red denotes enabled alarm.
To mark the time cells you can click on them individually or click and drag to highlight the
required time span.
To save the changes click
OK
, to ignore the changes click
CANCEL
.
Alarm Method
subsection will help you setup system behavior in case of a triggered alarm.
You can choose among the following options by checking the respective boxes:
Sound
Alarm, Send to Center, Email Notify
and
Trigger Alarm Output
(checking the latter
option will make available another checkbox
Output 1
)
If
Send to Center
is checked, when alarms are triggered on the DVR, in the right top
corner of the main screen you will see an alarm notification with the alarm input number,
such as “
Device alarm: IO alarm, IO input X
”.
Trigger Record
window lets you choose which channels will start recording after an alarm
is initiated. You can choose Channels 1 though 4/8* (depending on the model) individually,
or alternatively, use the
All
or
None
buttons located on the right.
PTZ Linkage
subsection deals with PTZ control and offers two options:
Joint Channel
: if a channel is connected to a PTZ camera, upon alarm, the PTZ camera
will be active. The dropdown menu offers a choice of
All Channels
or
Channels 1
though
4
individually.
Checking the
Present Point
box will move associated PTZ camera to Preset Point,
making available a dropdown menu with preset points.
The dropdown menu
Copy To
offers options:
All Alarm Input,
and
Alarm Input 1
through
4
individually. Pressing the Copy button will copy settings from current alarm to
All
or a
specified alarm input.
The functions of
Confirm
and
Cancel
buttons are self-explanatory and refer to the
parameters of this tab. As with all other tabs in the Device Parameters window, you can also
Restore Default
values by pressing the first button in the last row,
Save
the
Parameters
you just modified or
Exit
the window without saving.
