Guangzhou Liwei Stand-alone Type User Manual Download

Page: 14 / 99

- 13 -

3.4 Hardware Installation

It is recommended that the installations described below are carried out by qualified personnel.

3.4.1 Basic Connections

Cameras

Connect each of the cameras’ outputs to the video input socket in the rear panel of the

DVR using appropriate cables. The video input interface is a standard BNC connector,

1Vp-p, 75

Ω

. Please keep the video signal cable away from strong electromagnetic and

electric interference.

Audio Connection

The audio input interface is a standard RCA socket, 2Vp-p, 600

Ω

Please keep the audio signal cable away from strong electromagnetic and electric

interference.

Monitor

Connect the main output connector to a monitor or a TV screen. Use the BNC-to-RCA

connector to work with the Audio/Video RCA cable.

Power

Please use the 12V DC adapter supplied for connecting your DVR device with the

power source.

Alarm Input/Output

Connect Alarm In 1-4 to N.O. (Normally Open) or N.C.

(Normally Closed) alarm connectors and one Ground

connection. Connect Alarm Out to the corresponding

connections and Ground accordingly.

For detailed description please see

Section 5.6.2. Alarm

Input Type

Ethernet

For remote access to the video images from your cameras via LAN or the Internet,

please connect the standard RJ-45 twisted-pair Ethernet cable to the Ethernet connector.

USB

For connecting the mouse, USB flash drive, USB portable HDD, USB portable DVD

Recorder (for the list of compatible HDDs see

Appendix 3

, for the list of compatible

DVD Recorders see

Appendix 4

NOTE : The device only supports FAT32 file system on

the USB devices.

Summary of Contents for Stand-alone Type




































































































Search results

Summary of Contents for Stand-alone Type

Reviews:

Related manuals for Stand-alone Type

Brands by name

Popular brands

Guangzhou Liwei Stand-alone Type, User Manual

Search results

Summary of Contents for Stand-alone Type

Reviews:

Related manuals for Stand-alone Type

Brands by name

Popular brands