5
ADICOS GTL-3
430-2410-102 EN11
For your sAFety
2 For your Safety
For safe operation of the ADICOS GTL-3 it is absolutely necessary to completely read, under-
stand and follow this manual and the safety instructions contained herein.
WARNING!
Operating errors can cause fires and explosions.
• These instructions must be read and followed completely!
2.1 Intended Use
The ADICOS GTL-3 tester can only be used in combination with the SOLO battery bar from No
Climb Products Ltd. (detectortesters.com).
The test probe is designed for functional testing of ADICOS GSME fire gas detectors. The
operating parameters described in (–› Chap. 10, Technical Data) must be observed. Any other
use requires prior consultation with the manufacturer.
Intended use also includes following the instructions in this manual and complying with all
relevant local regulations.
2.2 Standards and Regulations
When testing ADICOS detectors, the safety and accident prevention regulations valid for the
specific application must be observed.
The following standards and guidelines are also of central importance for handling fire alarm
systems:
Regulation
Description
VDE 0800
Telecommunications - General terms, requirements and tests for the
safety of installations and equipment
VDE 0833
Alarm systems for fire, intrusion and hold-up
VDE 0845
Overvoltage protection of information technology equipment
VdS 2095
Automatic fire detection and fire alarm systems - Planning and Installation
DIN 14675
Fire detection and fire alarm systems
